GE JGB700 Gas Range Overview and Owner Notes

The GE JGB700 gas range uses a 5.0 cubic foot convection oven. It also runs a five burner, edge to edge cooktop. The center oval burner supports a griddle for big batches. Most trims include continuous, dishwasher safe grates. You will find the full model on the frame behind the oven door. That tag helps match parts with accuracy.

GE JGB700 Gas Range Problems You Can Spot Early

The oven that glows but never lights often needs an igniter. You may see a slow preheat or uneven baking as well. Next, check the door gasket for gaps or tears. Surface burners that click without lighting usually have damp caps or clogged ports. Clean the ports and seat each cap flat. Then test again for steady ignition.

GE Oven Not Heating on JGB700: Quick Steps

Start with the bake igniter. A healthy igniter glows and opens the gas valve. A weak one glows but never lights the burner. Next, run an oven thermometer test at 350°F. Keep it centered for 15 to 20 minutes. If readings drift, recalibrate through the controls. Replace the sensor when the swing stays large. Also check level so liquids do not pool to one side.

GE Gas Range Repair: When to Call Rapid Appliance Repair

Call when you smell gas or see no igniter glow. Call when multiple burners fail at once. We test current draw, continuity, and flame quality. We also verify control settings before we replace parts. Typical JGB700 fixes include bake igniters, temperature sensors, gaskets, and burner heads. Fast diagnostics save time and reduce repeat visits.

JGB700 Parts That Actually Solve Problems

Common wear parts include bake igniters and broil igniters. Owners also replace oven temperature sensors and door gaskets. Burner heads, caps, and control knobs round out the list. Always match parts by the full model number. Small letter changes can alter fit and function.

Simple Care Tips for a Reliable GE JGB700 Gas Range

Brush burner ports with a soft brush. Degrease grates so residue does not insulate igniters. Inspect the door gasket every month. Replace it when you see tears or flat spots. Vacuum around and under the range for better airflow. Use steam clean for light soil when available. Save self clean for rare deep clean cycles.

FAQ

What is the GE JGB700 gas range in simple terms?
It is a 30 inch GE freestanding gas range with convection baking. It uses five burners on an edge to edge cooktop and a center oval burner.

Why does my JGB700 oven glow but never light?
The igniter likely draws too little current. It glows but fails to open the gas valve. Replacing the igniter usually restores normal operation.

My burners keep clicking after I cleaned them. What now?
Dry the caps fully, clear the ports, and reseat the caps. If clicking continues, we test the electrode and the spark channel.

How can I check oven temperature accuracy?
Place a thermometer in the center and test at 350°F. Hold for 15 to 20 minutes. If readings drift, try control calibration. Replace the sensor if the swing remains large.

Do you handle LP conversion for the JGB700?
Yes. We install the correct kit and set the pressure. Gas work belongs with a qualified technician.

Should I repair or replace my JGB700?
Repair makes sense when the cabinet and top stay solid. Wear parts like igniters and sensors keep these units running for years.